|
 |
Our lightest and lowest-cost BASIC-programmable module yet, the
"vertical slice" EM500 squeezes our technology into 18.5x6.5mm of board
space. Saves you on BOM cost by working with a standard LED/magnetics
RJ45 jack. One serial port, 8 I/O lines, optional Wi-Fi. Member of the MiniMo family.
|
|
|
|
A miniature, yet powerful BASIC-programmable module. Best used with the RJ203
Ethernet front-end (also compatible with standard jack/magnetics). Four
serial ports, onboard flash, RTC, 17 I/O lines, optional Wi-Fi. Member of the x20x family.
(Not available in the US.)
|
|
|
|
Maintains most of the EM1000's features, while dramatically reducing required host PCB space. At only 19x17mm, the EM1202 is no larger than a standard RJ45 jack! Four serial ports, 32 I/O lines, onboard flash and EEPROM, optional Wi-Fi.
|
|
|
|
Our flagship BASIC-programmable module. Four serial ports, 54 I/O lines, onboard flash and EEPROM, RTC, optional Wi-Fi.
Powerful EM1000-TEV
development hardware available. No other Tibbo module has more features
— definitely the module to get your Tibbo BASIC project going.
|
|
|
|
Our popular serial-to-Ethernet module.
Works best with the RJ203 Ethernet front-end. Also compatible with standard jack/magnetics.
Comes with TDST software, which includes Virtual Serial Port Driver (VSPD).
Member of the x20x family.
(Not available in the US.)
|
|
|
|
The original orange serial-to-Ethernet module that put Tibbo on the map.
One 10BaseT port (with magnetics) and one TTL serial port in a low-power, sealed package.
Comes with TDST software, which includes Virtual Serial Port Driver (VSPD).
|
|
|
|
Miniature 802.11b/g add-on for use with our EM1000, EM1202, and EM1206 BASIC-programmable modules. Easy to use, fully integrated, low-power. Requires only 5 I/O lines to control!
(This device cannot operate by itself. It has to be controlled by one of our modules.)
|
|
|
|
Ethernet front-end module with magnetics and RJ45 jack. Unique space-saving design.
Use it in tandem with the EM203, EM1206, or Davicom DM9000 Ethernet IC.
Member of the x20x family.
(Patented design. Not available in the US.)
|
|
|
|
An improved version of the DS1202 device. Same multi-channel serial port, now with software-controlled power input/output.
Can be used as a serial device server — Tibbo BASIC serial-over-IP application available for free.
|
|
|
|
BASIC-programmable external controller. One 100BaseT Ethernet port, 3.5 serial channels on a single RS232 port, very compact dimensions. Onboard flash disk, EEPROM.
Can be used as a serial device server — Tibbo BASIC serial-over-IP application available for free.
|
|
|
|
Industrial-strength, IP68-compliant BASIC-programmable controller with four RS232 ports. Models with universal (RS232/422/485) and isolated serial ports are also available as DS1002 and DS1003.
Can be used as a serial device server — Tibbo BASIC serial-over-IP application available for free.
|
|
|
|
Features 8 analog inputs, 4 analog outputs, 2 relays and an RS232/485 port.
Member of the DS10xx family. Industrial strength, IP68 protection.
|
|
|
|
|
Features 8 isolated inputs, 6 high-power relays, and an RS232/485 port.
Can also be used as a two-door access control device.
Member of the DS10xx family. Industrial strength, IP68 protection.
|
|
|
|
Our second-gen device server, an improvement over the original DS100. Larger routing buffers, very compact dimensions, and 100BaseT Ethernet.
Comes with TDST software, which includes Virtual Serial Port Driver (VSPD).
|
|
| |
|
|
| |
|
|
A compact BASIC-programmable board. Small enough to be used in production devices. 10/100BaseT Ethernet, multi-channel serial port with optional power input/output. Three versions offering various serial port and power options.
|
|
|
|
EM1206EV Evaluation Board
Evaluation board for the EM1206 module and, optionally, the GA1000 Wi-Fi add-on. Includes the EM1206, RJ45 jack/magnetics, multi-channel RS232 port, power jack and regulator, LEDs, setup button, and an expansion connector with TTL I/O lines.
For more information, see EM1206EV documentation.
|
|
|
|
EM1000TEV Terminal Development System
The ultimate platform for developing terminal and automation applications based on the EM1000 (and, optionally, the GA1000
Wi-Fi add-on). Consists of a motherboard carrying the EM1000, and
additional boards carrying a display (3 types available), keypad, serial
ports and I/O.
For more information, see EM1000TEV documentation.
|
|
|
|
EM500EV Development System
Evaluation board and development system for the EM500 module.
Includes the EM500, RJ45 jack/magnetics, RS232 port, power jack and
regulator, dual-function LEDs, and a setup button.
For more information, see EM500EV documentation.
|
|
|
|
EM1000EV Development System
An ideal tool for developing and testing multi-port serial applications based on the EM1000 (and, optionally, the GA1000 Wi-Fi add-on). Includes an NB1000 board with the EM1000, RJ45 jack, magnetics, power jack and regulator, setup button; and an IB1000 board with four RS232 ports.
For more information, see EM1000EV documentation.
|
|
|
|
EM100EV Evaluation Board
Evaluation board for the EM100 module. Includes the EM100, RJ45 jack, magnetics, RS232 port, power jack and regulator, LEDs, setup button.
For more information, see EM100EV documentation.
|
